This is prototype production run for the Miminzuku, a stacked acrylic 65% board featuring a big fluffy neighbor in a collaboration with xinxinwong. https://www.twitch.tv/xinxinwong
This production run is invite only, so you should have a code to reduce the price to the correct price. Later, there will be a public GB, details to come.
Received parts! QCing and then packing orders!
This board is a modified version of an existing stacked acrylic design we've made before and features:
4 colors (Gray, Tan, White, Black)
Two Dual-Color Layers (more info at the bottom)
"Standard" 65% PCB support (more info at the bottom)
1.5mm plate (plate file available if you want to make your own)
Left side character (to avoid mouse)
To ensure the eyes are white and the belly is tan while also trying to keep those colors on the same layer to make sure the depth is not too much, we've added two dual-color layers. This means that the tan layer has a cut-out that a white insert goes into and one of the gray layers has a similar cut-out with a black insert. This increases costs slightly but allows a better use of colors and layers!
This board supports 65% PCBs with a left side USB-C port and a standard bottom row with .5u blocker.
There may be some others that I'm missing, let me know if you find other PCBs that will fit.
During this prototyping phase, we'll be using these PCBs. This prototype run does not come with a PCB, but when GB rolls around, those who supported us during this production run can get plates and PCBs at a highly reduced cost.
Because this doesn't come with a PCB (for prototype run only), the prototype production run should be only about a month. You'll need to order your own PCB as well.
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.